hypothesis steps of scientific

What Are The Steps Of The Scientific Method?

Julia Simkus

Editor at Simply Psychology

BA (Hons) Psychology, Princeton University

Julia Simkus is a graduate of Princeton University with a Bachelor of Arts in Psychology. She is currently studying for a Master's Degree in Counseling for Mental Health and Wellness in September 2023. Julia's research has been published in peer reviewed journals.

Learn about our Editorial Process

Saul McLeod, PhD

Editor-in-Chief for Simply Psychology

BSc (Hons) Psychology, MRes, PhD, University of Manchester

Saul McLeod, PhD., is a qualified psychology teacher with over 18 years of experience in further and higher education. He has been published in peer-reviewed journals, including the Journal of Clinical Psychology.

Olivia Guy-Evans, MSc

Associate Editor for Simply Psychology

BSc (Hons) Psychology, MSc Psychology of Education

Olivia Guy-Evans is a writer and associate editor for Simply Psychology. She has previously worked in healthcare and educational sectors.

On This Page:

Science is not just knowledge. It is also a method for obtaining knowledge. Scientific understanding is organized into theories.

The scientific method is a step-by-step process used by researchers and scientists to determine if there is a relationship between two or more variables. Psychologists use this method to conduct psychological research, gather data, process information, and describe behaviors.

It involves careful observation, asking questions, formulating hypotheses, experimental testing, and refining hypotheses based on experimental findings.

How it is Used

The scientific method can be applied broadly in science across many different fields, such as chemistry, physics, geology, and psychology. In a typical application of this process, a researcher will develop a hypothesis, test this hypothesis, and then modify the hypothesis based on the outcomes of the experiment.

The process is then repeated with the modified hypothesis until the results align with the observed phenomena. Detailed steps of the scientific method are described below.

Keep in mind that the scientific method does not have to follow this fixed sequence of steps; rather, these steps represent a set of general principles or guidelines.

7 Steps of the Scientific Method

Psychology uses an empirical approach.

Empiricism (founded by John Locke) states that the only source of knowledge comes through our senses – e.g., sight, hearing, touch, etc.

Empirical evidence does not rely on argument or belief. Thus, empiricism is the view that all knowledge is based on or may come from direct observation and experience.

The empiricist approach of gaining knowledge through experience quickly became the scientific approach and greatly influenced the development of physics and chemistry in the 17th and 18th centuries.

Step 1: Make an Observation (Theory Construction)

Every researcher starts at the very beginning. Before diving in and exploring something, one must first determine what they will study – it seems simple enough!

By making observations, researchers can establish an area of interest. Once this topic of study has been chosen, a researcher should review existing literature to gain insight into what has already been tested and determine what questions remain unanswered.

This assessment will provide helpful information about what has already been comprehended about the specific topic and what questions remain, and if one can go and answer them.

Specifically, a literature review might implicate examining a substantial amount of documented material from academic journals to books dating back decades. The most appropriate information gathered by the researcher will be shown in the introduction section or abstract of the published study results.

The background material and knowledge will help the researcher with the first significant step in conducting a psychology study, which is formulating a research question.

This is the inductive phase of the scientific process. Observations yield information that is used to formulate theories as explanations. A theory is a well-developed set of ideas that propose an explanation for observed phenomena.

Inductive reasoning moves from specific premises to a general conclusion. It starts with observations of phenomena in the natural world and derives a general law.

Step 2: Ask a Question

Once a researcher has made observations and conducted background research, the next step is to ask a scientific question. A scientific question must be defined, testable, and measurable.

A useful approach to develop a scientific question is: “What is the effect of…?” or “How does X affect Y?”

To answer an experimental question, a researcher must identify two variables: the independent and dependent variables.

The independent variable is the variable manipulated (the cause), and the dependent variable is the variable being measured (the effect).

An example of a research question could be, “Is handwriting or typing more effective for retaining information?” Answering the research question and proposing a relationship between the two variables is discussed in the next step.

Step 3: Form a Hypothesis (Make Predictions)

A hypothesis is an educated guess about the relationship between two or more variables. A hypothesis is an attempt to answer your research question based on prior observation and background research. Theories tend to be too complex to be tested all at once; instead, researchers create hypotheses to test specific aspects of a theory.

For example, a researcher might ask about the connection between sleep and educational performance. Do students who get less sleep perform worse on tests at school?

It is crucial to think about different questions one might have about a particular topic to formulate a reasonable hypothesis. It would help if one also considered how one could investigate the causalities.

It is important that the hypothesis is both testable against reality and falsifiable. This means that it can be tested through an experiment and can be proven wrong.

The falsification principle, proposed by Karl Popper , is a way of demarcating science from non-science. It suggests that for a theory to be considered scientific, it must be able to be tested and conceivably proven false.

To test a hypothesis, we first assume that there is no difference between the populations from which the samples were taken. This is known as the null hypothesis and predicts that the independent variable will not influence the dependent variable.

Examples of “if…then…” Hypotheses:

• If one gets less than 6 hours of sleep, then one will do worse on tests than if one obtains more rest.
• If one drinks lots of water before going to bed, one will have to use the bathroom often at night.
• If one practices exercising and lighting weights, then one’s body will begin to build muscle.

The research hypothesis is often called the alternative hypothesis and predicts what change(s) will occur in the dependent variable when the independent variable is manipulated.

It states that the results are not due to chance and that they are significant in terms of supporting the theory being investigated.

Although one could state and write a scientific hypothesis in many ways, hypotheses are usually built like “if…then…” statements.

Step 4: Run an Experiment (Gather Data)

The next step in the scientific method is to test your hypothesis and collect data. A researcher will design an experiment to test the hypothesis and gather data that will either support or refute the hypothesis.

The exact research methods used to examine a hypothesis depend on what is being studied. A psychologist might utilize two primary forms of research, experimental research, and descriptive research.

The scientific method is objective in that researchers do not let preconceived ideas or biases influence the collection of data and is systematic in that experiments are conducted in a logical way.

Experimental Research

Experimental research is used to investigate cause-and-effect associations between two or more variables. This type of research systematically controls an independent variable and measures its effect on a specified dependent variable.

Experimental research involves manipulating an independent variable and measuring the effect(s) on the dependent variable. Repeating the experiment multiple times is important to confirm that your results are accurate and consistent.

One of the significant advantages of this method is that it permits researchers to determine if changes in one variable cause shifts in each other.

While experiments in psychology typically have many moving parts (and can be relatively complex), an easy investigation is rather fundamental. Still, it does allow researchers to specify cause-and-effect associations between variables.

Most simple experiments use a control group, which involves those who do not receive the treatment, and an experimental group, which involves those who do receive the treatment.

An example of experimental research would be when a pharmaceutical company wants to test a new drug. They give one group a placebo (control group) and the other the actual pill (experimental group).

Descriptive Research

Descriptive research is generally used when it is challenging or even impossible to control the variables in question. Examples of descriptive analysis include naturalistic observation, case studies , and correlation studies .

One example of descriptive research includes phone surveys that marketers often use. While they typically do not allow researchers to identify cause and effect, correlational studies are quite common in psychology research. They make it possible to spot associations between distinct variables and measure the solidity of those relationships.

Step 5: Analyze the Data and Draw Conclusions

Once a researcher has designed and done the investigation and collected sufficient data, it is time to inspect this gathered information and judge what has been found. Researchers can summarize the data, interpret the results, and draw conclusions based on this evidence using analyses and statistics.

Upon completion of the experiment, you can collect your measurements and analyze the data using statistics. Based on the outcomes, you will either reject or confirm your hypothesis.

Analyze the Data

So, how does a researcher determine what the results of their study mean? Statistical analysis can either support or refute a researcher’s hypothesis and can also be used to determine if the conclusions are statistically significant.

When outcomes are said to be “statistically significant,” it is improbable that these results are due to luck or chance. Based on these observations, investigators must then determine what the results mean.

An experiment will support a hypothesis in some circumstances, but sometimes it fails to be truthful in other cases.

What occurs if the developments of a psychology investigation do not endorse the researcher’s hypothesis? It does mean that the study was worthless. Simply because the findings fail to defend the researcher’s hypothesis does not mean that the examination is not helpful or instructive.

This kind of research plays a vital role in supporting scientists in developing unexplored questions and hypotheses to investigate in the future. After decisions have been made, the next step is to communicate the results with the rest of the scientific community.

This is an integral part of the process because it contributes to the general knowledge base and can assist other scientists in finding new research routes to explore.

If the hypothesis is not supported, a researcher should acknowledge the experiment’s results, formulate a new hypothesis, and develop a new experiment.

We must avoid any reference to results proving a theory as this implies 100% certainty, and there is always a chance that evidence may exist that could refute a theory.

Draw Conclusions and Interpret the Data

When the empirical observations disagree with the hypothesis, a number of possibilities must be considered. It might be that the theory is incorrect, in which case it needs altering, so it fully explains the data.

Alternatively, it might be that the hypothesis was poorly derived from the original theory, in which case the scientists were expecting the wrong thing to happen.

It might also be that the research was poorly conducted, or used an inappropriate method, or there were factors in play that the researchers did not consider. This will begin the process of the scientific method again.

If the hypothesis is supported, the researcher can find more evidence to support their hypothesis or look for counter-evidence to strengthen their hypothesis further.

In either scenario, the researcher should share their results with the greater scientific community.

Step 6: Share Your Results

One of the final stages of the research cycle involves the publication of the research. Once the report is written, the researcher(s) may submit the work for publication in an appropriate journal.

Usually, this is done by writing up a study description and publishing the article in a professional or academic journal. The studies and conclusions of psychological work can be seen in peer-reviewed journals such as  Developmental Psychology , Psychological Bulletin, the  Journal of Social Psychology, and numerous others.

Scientists should report their findings by writing up a description of their study and any subsequent findings. This enables other researchers to build upon the present research or replicate the results.

As outlined by the American Psychological Association (APA), there is a typical structure of a journal article that follows a specified format. In these articles, researchers:

• Supply a brief narrative and background on previous research
• Give their hypothesis
• Specify who participated in the study and how they were chosen
• Provide operational definitions for each variable
• Explain the measures and methods used to collect data
• Describe how the data collected was interpreted
• Discuss what the outcomes mean

A detailed record of psychological studies and all scientific studies is vital to clearly explain the steps and procedures used throughout the study. So that other researchers can try this experiment too and replicate the results.

The editorial process utilized by academic and professional journals guarantees that each submitted article undergoes a thorough peer review to help assure that the study is scientifically sound. Once published, the investigation becomes another piece of the current puzzle of our knowledge “base” on that subject.

This last step is important because all results, whether they supported or did not support the hypothesis, can contribute to the scientific community. Publication of empirical observations leads to more ideas that are tested against the real world, and so on. In this sense, the scientific process is circular.

The editorial process utilized by academic and professional journals guarantees that each submitted article undergoes a thorough peer review to help assure that the study is scientifically sound.

Once published, the investigation becomes another piece of the current puzzle of our knowledge “base” on that subject.

By replicating studies, psychologists can reduce errors, validate theories, and gain a stronger understanding of a particular topic.

Step 7: Repeat the Scientific Method (Iteration)

Now, if one’s hypothesis turns out to be accurate, find more evidence or find counter-evidence. If one’s hypothesis is false, create a new hypothesis or try again.

One may wish to revise their first hypothesis to make a more niche experiment to design or a different specific question to test.

The amazingness of the scientific method is that it is a comprehensive and straightforward process that scientists, and everyone, can utilize over and over again.

So, draw conclusions and repeat because the scientific method is never-ending, and no result is ever considered perfect.

The scientific method is a process of:

• Making an observation.
• Forming a hypothesis.
• Making a prediction.
• Experimenting to test the hypothesis.

The procedure of repeating the scientific method is crucial to science and all fields of human knowledge.

Further Information

• Karl Popper – Falsification
• Thomas – Kuhn Paradigm Shift
• Positivism in Sociology: Definition, Theory & Examples
• Is Psychology a Science?
• Psychology as a Science (PDF)

List the 6 steps of the scientific methods in order

• Make an observation (theory construction)
• Ask a question. A scientific question must be defined, testable, and measurable.
• Form a hypothesis (make predictions)
• Run an experiment to test the hypothesis (gather data)
• Analyze the data and draw conclusions
• Share your results so that other researchers can make new hypotheses

What is the first step of the scientific method?

The first step of the scientific method is making an observation. This involves noticing and describing a phenomenon or group of phenomena that one finds interesting and wishes to explain.

Observations can occur in a natural setting or within the confines of a laboratory. The key point is that the observation provides the initial question or problem that the rest of the scientific method seeks to answer or solve.

What is the scientific method?

The scientific method is a step-by-step process that investigators can follow to determine if there is a causal connection between two or more variables.

Psychologists and other scientists regularly suggest motivations for human behavior. On a more casual level, people judge other people’s intentions, incentives, and actions daily.

While our standard assessments of human behavior are subjective and anecdotal, researchers use the scientific method to study psychology objectively and systematically.

All utilize a scientific method to study distinct aspects of people’s thinking and behavior. This process allows scientists to analyze and understand various psychological phenomena, but it also provides investigators and others a way to disseminate and debate the results of their studies.

The outcomes of these studies are often noted in popular media, which leads numerous to think about how or why researchers came to the findings they did.

Why Use the Six Steps of the Scientific Method

The goal of scientists is to understand better the world that surrounds us. Scientific research is the most critical tool for navigating and learning about our complex world.

Without it, we would be compelled to rely solely on intuition, other people’s power, and luck. We can eliminate our preconceived concepts and superstitions through methodical scientific research and gain an objective sense of ourselves and our world.

All psychological studies aim to explain, predict, and even control or impact mental behaviors or processes. So, psychologists use and repeat the scientific method (and its six steps) to perform and record essential psychological research.

So, psychologists focus on understanding behavior and the cognitive (mental) and physiological (body) processes underlying behavior.

In the real world, people use to understand the behavior of others, such as intuition and personal experience. The hallmark of scientific research is evidence to support a claim.

Scientific knowledge is empirical, meaning it is grounded in objective, tangible evidence that can be observed repeatedly, regardless of who is watching.

The scientific method is crucial because it minimizes the impact of bias or prejudice on the experimenter. Regardless of how hard one tries, even the best-intentioned scientists can’t escape discrimination. can’t

It stems from personal opinions and cultural beliefs, meaning any mortal filters data based on one’s experience. Sadly, this “filtering” process can cause a scientist to favor one outcome over another.

For an everyday person trying to solve a minor issue at home or work, succumbing to these biases is not such a big deal; in fact, most times, it is important.

But in the scientific community, where results must be inspected and reproduced, bias or discrimination must be avoided.

When to Use the Six Steps of the Scientific Method ?

One can use the scientific method anytime, anywhere! From the smallest conundrum to solving global problems, it is a process that can be applied to any science and any investigation.

Even if you are not considered a “scientist,” you will be surprised to know that people of all disciplines use it for all kinds of dilemmas.

Try to catch yourself next time you come by a question and see how you subconsciously or consciously use the scientific method.

The Scientific Method by Science Made Simple

Understanding and using the scientific method.

The Scientific Method is a process used to design and perform experiments. It's important to minimize experimental errors and bias, and increase confidence in the accuracy of your results.

In the previous sections, we talked about how to pick a good topic and specific question to investigate. Now we will discuss how to carry out your investigation.

Steps of the Scientific Method

• Observation/Research
• Experimentation

Now that you have settled on the question you want to ask, it's time to use the Scientific Method to design an experiment to answer that question.

If your experiment isn't designed well, you may not get the correct answer. You may not even get any definitive answer at all!

The Scientific Method is a logical and rational order of steps by which scientists come to conclusions about the world around them. The Scientific Method helps to organize thoughts and procedures so that scientists can be confident in the answers they find.

OBSERVATION is first step, so that you know how you want to go about your research.

HYPOTHESIS is the answer you think you'll find.

PREDICTION is your specific belief about the scientific idea: If my hypothesis is true, then I predict we will discover this.

EXPERIMENT is the tool that you invent to answer the question, and

CONCLUSION is the answer that the experiment gives.

Don't worry, it isn't that complicated. Let's take a closer look at each one of these steps. Then you can understand the tools scientists use for their science experiments, and use them for your own.

OBSERVATION

This step could also be called "research." It is the first stage in understanding the problem.

After you decide on topic, and narrow it down to a specific question, you will need to research everything that you can find about it. You can collect information from your own experiences, books, the internet, or even smaller "unofficial" experiments.

Let's continue the example of a science fair idea about tomatoes in the garden. You like to garden, and notice that some tomatoes are bigger than others and wonder why.

Because of this personal experience and an interest in the problem, you decide to learn more about what makes plants grow.

For this stage of the Scientific Method, it's important to use as many sources as you can find. The more information you have on your science fair topic, the better the design of your experiment is going to be, and the better your science fair project is going to be overall.

Also try to get information from your teachers or librarians, or professionals who know something about your science fair project. They can help to guide you to a solid experimental setup.

The next stage of the Scientific Method is known as the "hypothesis." This word basically means "a possible solution to a problem, based on knowledge and research."

The hypothesis is a simple statement that defines what you think the outcome of your experiment will be.

All of the first stage of the Scientific Method -- the observation, or research stage -- is designed to help you express a problem in a single question ("Does the amount of sunlight in a garden affect tomato size?") and propose an answer to the question based on what you know. The experiment that you will design is done to test the hypothesis.

Using the example of the tomato experiment, here is an example of a hypothesis:

TOPIC: "Does the amount of sunlight a tomato plant receives affect the size of the tomatoes?"

HYPOTHESIS: "I believe that the more sunlight a tomato plant receives, the larger the tomatoes will grow.

This hypothesis is based on:

(1) Tomato plants need sunshine to make food through photosynthesis, and logically, more sun means more food, and;

(2) Through informal, exploratory observations of plants in a garden, those with more sunlight appear to grow bigger.

The hypothesis is your general statement of how you think the scientific phenomenon in question works.

Your prediction lets you get specific -- how will you demonstrate that your hypothesis is true? The experiment that you will design is done to test the prediction.

An important thing to remember during this stage of the scientific method is that once you develop a hypothesis and a prediction, you shouldn't change it, even if the results of your experiment show that you were wrong.

An incorrect prediction does NOT mean that you "failed." It just means that the experiment brought some new facts to light that maybe you hadn't thought about before.

Continuing our tomato plant example, a good prediction would be: Increasing the amount of sunlight tomato plants in my experiment receive will cause an increase in their size compared to identical plants that received the same care but less light.

This is the part of the scientific method that tests your hypothesis. An experiment is a tool that you design to find out if your ideas about your topic are right or wrong.

It is absolutely necessary to design a science fair experiment that will accurately test your hypothesis. The experiment is the most important part of the scientific method. It's the logical process that lets scientists learn about the world.

On the next page, we'll discuss the ways that you can go about designing a science fair experiment idea.

The final step in the scientific method is the conclusion. This is a summary of the experiment's results, and how those results match up to your hypothesis.

You have two options for your conclusions: based on your results, either:

(1) YOU CAN REJECT the hypothesis, or

(2) YOU CAN NOT REJECT the hypothesis.

This is an important point!

You can not PROVE the hypothesis with a single experiment, because there is a chance that you made an error somewhere along the way.

What you can say is that your results SUPPORT the original hypothesis.

If your original hypothesis didn't match up with the final results of your experiment, don't change the hypothesis.

Instead, try to explain what might have been wrong with your original hypothesis. What information were you missing when you made your prediction? What are the possible reasons the hypothesis and experimental results didn't match up?

Remember, a science fair experiment isn't a failure simply because does not agree with your hypothesis. No one will take points off if your prediction wasn't accurate. Many important scientific discoveries were made as a result of experiments gone wrong!

A science fair experiment is only a failure if its design is flawed. A flawed experiment is one that (1) doesn't keep its variables under control, and (2) doesn't sufficiently answer the question that you asked of it.

Search This Site:

Science Fairs

• Introduction
• Project Ideas
• Types of Projects
• Pick a Topic
• Scientific Method
• Design Your Experiment
• Present Your Project
• What Judges Want
• Parent Info

Recommended *

• Sample Science Projects - botany, ecology, microbiology, nutrition

* This site contains affiliate links to carefully chosen, high quality products. We may receive a commission for purchases made through these links.

• Terms of Service

Copyright © 2006 - 2023, Science Made Simple, Inc. All Rights Reserved.

The science fair projects & ideas, science articles and all other material on this website are covered by copyright laws and may not be reproduced without permission.

• Science Notes Posts
• Contact Science Notes
• Todd Helmenstine Biography
• Anne Helmenstine Biography
• Free Printable Periodic Tables (PDF and PNG)
• Periodic Table Wallpapers
• Interactive Periodic Table
• Periodic Table Posters
• Science Experiments for Kids
• How to Grow Crystals
• Chemistry Projects
• Fire and Flames Projects
• Holiday Science
• Chemistry Problems With Answers
• Physics Problems
• Unit Conversion Example Problems
• Chemistry Worksheets
• Biology Worksheets
• Periodic Table Worksheets
• Physical Science Worksheets
• Science Lab Worksheets
• My Amazon Books

Steps of the Scientific Method 2

The scientific method is a system scientists and other people use to ask and answer questions about the natural world. In a nutshell, the scientific method works by making observations, asking a question or identifying a problem, and then designing and analyzing an experiment to test a prediction of what you expect will happen. It’s a powerful analytical tool because once you draw conclusions, you may be able to answer a question and make predictions about future events.

These are the steps of the scientific method:

• Make observations.

Sometimes this step is omitted in the list, but you always make observations before asking a question, whether you recognize it or not. You always have some background information about a topic. However, it’s a good idea to be systematic about your observations and to record them in a lab book or another way. Often, these initial observations can help you identify a question. Later on, this information may help you decide on another area of investigation of a topic.

• Ask a question, identify a problem, or state an objective.

There are various forms of this step. Sometimes you may want to state an objective and a problem and then phrase it in the form of a question. The reason it’s good to state a question is because it’s easiest to design an experiment to answer a question. A question helps you form a hypothesis, which focuses your study.

• Research the topic.

You should conduct background research on your topic to learn as much as you can about it. This can occur both before and after you state an objective and form a hypothesis. In fact, you may find yourself researching the topic throughout the entire process.

• Formulate a hypothesis.

A hypothesis is a formal prediction. There are two forms of a hypothesis that are particularly easy to test. One is to state the hypothesis as an “if, then” statement. An example of an if-then hypothesis is: “If plants are grown under red light, then they will be taller than plants grown under white light.” Another good type of hypothesis is what is called a “ null hypothesis ” or “no difference” hypothesis. An example of a null hypothesis is: “There is no difference in the rate of growth of plants grown under red light compared with plants grown under white light.”

• Design and perform an experiment to test the hypothesis.

Once you have a hypothesis, you need to find a way to test it. This involves an experiment . There are many ways to set up an experiment. A basic experiment contains variables, which are factors you can measure. The two main variables are the independent variable (the one you control or change) and the dependent variable (the one you measure to see if it is affected when you change the independent variable).

• Record and analyze the data you obtain from the experiment.

It’s a good idea to record notes alongside your data, stating anything unusual or unexpected. Once you have the data, draw a chart, table, or graph to present your results. Next, analyze the results to understand what it all means.

• Determine whether you accept or reject the hypothesis.

Do the results support the hypothesis or not? Keep in mind, it’s okay if the hypothesis is not supported, especially if you are testing a null hypothesis. Sometimes excluding an explanation answers your question! There is no “right” or “wrong” here. However, if you obtain an unexpected result, you might want to perform another experiment.

• Draw a conclusion and report the results of the experiment.

What good is knowing something if you keep it to yourself? You should report the outcome of the experiment, even if it’s just in a notebook. What did you learn from the experiment?

How Many Steps Are There?

You may be asked to list the 5 steps of the scientific method or the 6 steps of the method or some other number. There are different ways of grouping together the steps outlined here, so it’s a good idea to learn the way an instructor wants you to list the steps. No matter how many steps there are, the order is always the same.

Related Posts

2 thoughts on “ steps of the scientific method ”.

You raise a valid point, but peer review has its limitations. Consider the case of Galileo, for example.

That’s a good point too. But that was a rare limitation due to religion, and scientific consensus prevailed in the end. It’s nowhere near a reason to doubt scientific consensus in general. I’m thinking about issues such as climate change where so many people are skeptical despite 97% consensus among climate scientists. I was just surprised to see that this is not included as an important part of the process.

Comments are closed.

• Science, Tech, Math ›

Scientific Method Example

Illustration by J.R. Bee. ThoughtCo. 

• Cell Biology
• Weather & Climate
• B.A., Biology, Emory University
• A.S., Nursing, Chattahoochee Technical College

The scientific method is a series of steps that scientific investigators follow to answer specific questions about the natural world. Scientists use the scientific method to make observations, formulate hypotheses , and conduct scientific experiments .

A scientific inquiry starts with an observation. Then, the formulation of a question about what has been observed follows. Next, the scientist will proceed through the remaining steps of the scientific method to end at a conclusion.

The six steps of the scientific method are as follows:

Observation

The first step of the scientific method involves making an observation about something that interests you. Taking an interest in your scientific discovery is important, for example, if you are doing a science project , because you will want to work on something that holds your attention. Your observation can be of anything from plant movement to animal behavior, as long as it is something you want to know more about.​ This step is when you will come up with an idea if you are working on a science project.

Once you have made your observation, you must formulate a question about what you observed. Your question should summarize what it is you are trying to discover or accomplish in your experiment. When stating your question, be as specific as possible.​ For example, if you are doing a project on plants , you may want to know how plants interact with microbes. Your question could be: Do plant spices inhibit bacterial growth ?

The hypothesis is a key component of the scientific process. A hypothesis is an idea that is suggested as an explanation for a natural event, a particular experience, or a specific condition that can be tested through definable experimentation. It states the purpose of your experiment, the variables used, and the predicted outcome of your experiment. It is important to note that a hypothesis must be testable. That means that you should be able to test your hypothesis through experimentation .​ Your hypothesis must either be supported or falsified by your experiment. An example of a good hypothesis is: If there is a relation between listening to music and heart rate, then listening to music will cause a person's resting heart rate to either increase or decrease.

Once you have developed a hypothesis, you must design and conduct an experiment that will test it. You should develop a procedure that states clearly how you plan to conduct your experiment. It is important you include and identify a controlled variable or dependent variable in your procedure. Controls allow us to test a single variable in an experiment because they are unchanged. We can then make observations and comparisons between our controls and our independent variables (things that change in the experiment) to develop an accurate conclusion.​

The results are where you report what happened in the experiment. That includes detailing all observations and data made during your experiment. Most people find it easier to visualize the data by charting or graphing the information.​

Developing a conclusion is the final step of the scientific method. This is where you analyze the results from the experiment and reach a determination about the hypothesis. Did the experiment support or reject your hypothesis? If your hypothesis was supported, great. If not, repeat the experiment or think of ways to improve your procedure.

• Glycolysis Steps
• Biology Prefixes and Suffixes: chrom- or chromo-
• Biology Prefixes and Suffixes: proto-
• 6 Things You Should Know About Biological Evolution
• Biology Prefixes and Suffixes: Aer- or Aero-
• Taxonomy and Organism Classification
• Homeostasis
• Biology Prefixes and Suffixes: diplo-
• The Biology Suffix -lysis
• Biology Prefixes and Suffixes Index
• Biology Prefixes and Suffixes: tel- or telo-
• Parasitism: Definition and Examples
• Biology Prefixes and Suffixes: Erythr- or Erythro-
• Biology Prefixes and Suffixes: ana-
• Biology Prefixes and Suffixes: phago- or phag-
• Biology Prefixes and Suffixes: -phyll or -phyl

The Scientific Method

What is the scientific method, research starters, observation, analyze results, draw conclusions.

• Scientific Method Resources

According to Kosso (2011), the scientific method is a specific step-by-step method that aims to answer a question or prove a hypothesis.  It is the process used among all scientific disciplines and is used to conduct both small and large experiments.  It has been used for centuries to solve scientific problems and identify solutions.  While the terminology can be different across disciplines, the scientific method follows these six steps (Larson, 2015):

• Analyze results
• Draw conclusions

Click on each link to learn more about each step in the scientific method, or watch the video below for an introduction to each step.

Research Starters  is a feature available when searching  DragonQuest . You may notice when you enter a generic search term into DragonQuest that a research starter is your first result.

Research Starter  entries are similar to a Wikipedia entry of the topic, but  Research Starters  are pulled from quality sources such as Salem Press, Encyclopedia Britannica, and American National Biography.  Research Starters  can be a great place to begin your research, if you're not yet sure about your topic details.  There are several Research Starters related to the steps of the scientific method:

• Scientific method
• Research methodology
• Research methods

Using Research Starters

To use  Research Starters,  click on the title just as you would for any other  DragonQuest  entry. You will then find a broad overview of the topic. This entry is great for finding

• Subtopics that can narrow your searching
• Background information to support your claims
• Sources you can use and cite in your research

We do not recommend that you use  Research Starters  as a source itself though, because of the difficulties in citation.

Citing Research Starters

Using  Research Starters  as an actual source is not recommended.

Just as we do not recommend using Wikipedia as a source,  Research Starters  is the same. Use  Research Starters  as a starting point to get ideas about how to narrow your search and to use its bibliography to find sources you can cite.

We recommend this because citing  Research Starters  can be tricky as sometimes it will have insufficient bibliographic data to create your reference page.

To begin the scientific method, you have to observe something and identify a problem.  You can observe basically anything, such as a person, place, object, situation, or environment.  Examples of an observation include:

• "My cotton shirt gets more wet in the rain than my friend's silk shirt."
• "I feel more tired after eating a cookie than I do after eating a salad."

Once you have made an observation, it will lead to creating a scientific question (Larson, 2015).  The question focuses on a specific part of your observation:

• Why does a cotton shirt get more wet in the rain than a silk shirt?
• Why do I more tired after eating a cookie than if I ate a salad?

Scientific questions lead to research and crafting a hypothesis, which are the next steps in the scientific method.  Watch the video below for more information on observations.

Once you identify a topic and question from your observations, it is time to conduct some preliminary research.  It is meant to locate a potential answer to your research question or give you ideas on how to draft your hypothesis.  In some cases, it can also help you design an experiment once you determine your hypothesis.  It is a good idea to research your topic or problem using the library and/or the Internet.  It is also recommended to check out different source types for information, such as:

• Academic journals
• News reports
• Audiovisual media (radio, podcasts, etc.)

Background Information

It is important to gather lots of background information on your topic or problem so you understand the topic thoroughly.  It is also critical to find and understand what others have already written about your research question.  This prevents you from experimenting on an issue that already has a definitive answer.

If you need assistance in conducting preliminary research, view our guide on locating background information at the bottom of this box.

If you are unsure where you should start researching, you can view our list of science databases through our  A-Z database list  by selecting "Science" from the subjects dropdown menu.  We also have several research guides that cover topics in the sciences, which can be viewed on our Help page.

Not sure where to begin your research?  Try searching a database in our A-Z list or using one of our  EBSCOhost databases !

• Finding Background Information by Pfeiffer Library Last Updated Jul 10, 2024 106 views this year

When you have gathered enough information on your research question and determined that your question has not already been answered, you can form a hypothesis.  A hypothesis is an educated guess or possible explanation meant to answer your research question.  It often follows the "if, then..." sentence structure because it explains a cause/effect relationship between two variables.  A hypothesis is supposed to form a relationship between the two variables.

• Example hypothesis: "If I soak a penny in lemon juice, then it will look cleaner than if I soak it in soap."

In this example, it is explaining a relationship between a penny and different cleaning agents.  While crafting your hypothesis, it is important to make sure that your "then" statement is something that can be measured, either quantitatively or qualitatively.  In the above example, an experiment for the hypothesis would be measuring the cleanliness of the penny after being exposed to either soap or lemon juice.

For more information on hypotheses, view DragonQuest's Research Starter on hypotheses here .  Alternatively, you can watch the video below for more details on crafting hypotheses.

The fourth step in the scientific method is the experiment stage.  This is where you craft an experiment to test your hypothesis.  The point of an experiment is to find out how changing one thing impacts another (Larson, 2015).  To test a hypothesis, you must implement and change different variables in your experiment.

Anything that you modify in an experiment is considered a variable.  There are two types of variables:

• Independent variable:  The variable that is modified in an experiment so that is has a direct impact on the dependent variable.  It is the variable that you control in the experiment (Larson, 2015).
• Dependent variable:  The variable that is being tested in an experiment, whose measure is directly related to the change of the independent variable (the dependent variable is dependent on the independent variable).  This is what you measure to prove or disprove your hypothesis.

Every experiment must also have a control group , which is a variable that remains unchanged for the duration of the experiment (Larson, 2015).  It is used to compare the results of the dependent variable.  In the case of the sample hypothesis above, a control variable would be a penny that does not receive any cleaning agent.

Research Methods

There are several ways to conduct an experiment.  The approach you take is dependent on your own strengths and weaknesses, the nature of your topic/hypothesis, and the resources you have available to conduct the experiment.  If you are unsure as to what research method you would like to use for your experiment, you can view our research methodologies guide below.  DragonQuest also has a Research Starter on research methods, located  here .

• Research Methodologies by Pfeiffer Library Last Updated Aug 2, 2022 65735 views this year

When designing your experiment:

• Make a list of materials that you will need to conduct your experiment.  If you will need to purchase additional materials, create a budget.
• Consider the best locations for your experiment, especially if outside factors (weather, etc.) may effect the results.
• If you need additional funding for an experiment, it is recommended to consider writing a research proposal for the entity from which you want to receive funding.  You can view our guide on writing research proposals below.

You can also watch the video below to learn more about designing experiments.  Or, you can view DragonQuest's Research Starter on experiments here .

• Writing a Research Proposal by Pfeiffer Library Last Updated May 22, 2023 36469 views this year

When conducting your experiment:

• Record or write down your experimental procedure so that each variable it tested equally.  It is likely that you will conduct your experiment more than once, so it is important that it is conducted exactly the same each time (Larson, 2015).
• Be aware of outside factors that could impact your experiment and results.  Outside factors could include weather patterns, time of day, location, and temperature.
• Wear protective equipment to keep yourself safe during the experiment.
• Record your results on a transferrable platform (Google Spreadsheets, Microsoft Excel, etc.), especially if you plan on running statistical analyses on your data using a computer program.  You should also back your data up electronically so you do not lose it!
• Use a table or chart to record data by hand.  The x-axis (row) of a chart should represent the independent variable, while the y-axis (column) should represent the dependent variable (Riverside Local Schools, n.d.).
• Be prepared for unexpected results.  Some experiments can unexpectedly "go wrong" resulting in different data than planned.  Do not feel defeated if this happens in your experiment!  Once the tests are completed, you can analyze and determine why the experiment went differently.

Before arriving at a conclusion, you must look at all your evidence and analyze it.  Data analysis is "the process of interpreting the meaning of the data we have collected, organized, and displayed in the form of a chart or graph" (Riverside Local Schools, p. 1.).  If you did not create a graph or chart while recording your data, you may choose to create one to analyze your results.  Or, you may choose to create a more elaborate chart from the one you used in the experiment.  Graphs and charts organize data so that you can easily identify trends or patterns.  Patterns are similarities, differences, and relationships that tell you the "big picture" of an experiment (Riverside Local Schools, n.d.).

Questions to Consider

There are several things to consider when analyzing your data:

• What exactly am I trying to discover from this data?
• How does my data relate to my hypothesis?
• Are there any noticeable patterns or trends in the data?  If so, what do these patterns mean?
• Is my data good quality?  Was my data skewed in any way?
• Were there any limitations to retrieving this data during the experiment?

Once you have identified patterns or trends and considered the above questions, you can summarize your findings to draw your final conclusions.

Drawing conclusions is the final step in the scientific method.  It gives you the opportunity to combine your findings and communicate them to your audience.  A conclusion is "a summary of what you have learned from the experiment" (Riverside Local Schools, p. 1).  To draw a conclusion, you will compare your data analysis to your hypothesis and make a statement based on the comparison.  Your conclusion should answer the following questions:

• Was your hypothesis correct?
• Does my data support my hypothesis?
• If your hypothesis was incorrect, what did you learn from the experiment?
• Do you need to change a variable if the experiment is repeated?
• Is your data coherent and easy to understand?
• If the experiment failed, what did you learn?

A strong conclusion should also (American Psychological Association, 2021):

• Be justifiable by the data you collected.
• Provide generalizations that are limited to the sample you studied.
• Relate your preliminary research (background information) to your experiment and state how your conclusion is relevant.
• Be logical and address any potential discrepancies (American Psychological Association, 2021).

Reporting Your Results

Once you have drawn your conclusions, you will communicate your results to others.  This can be in the form of a formal research paper, presentation, or assignment that you submit to an instructor for a grade.  If you are looking to submit an original work to an academic journal, it will require approval and undergo peer-review before being published.  However, it is important to be aware of predatory publishers.  You can view our guide on predatory publishing below.

• Predatory Publishing by Pfeiffer Library Last Updated Aug 2, 2023 913 views this year
• << Previous: Welcome
• Next: Scientific Method Resources >>
• Last Updated: May 16, 2024 4:20 PM
• URL: https://library.tiffin.edu/thescientificmethod

Navigating the Scientific Method: A Step-by-Step Guide

In the world of research, the scientific method is a fundamental process that underpins the discovery of knowledge. Whether you’re studying biology, physics, or even social sciences, this systematic approach helps us make sense of the world by transforming observations into verifiable facts. But what exactly is the scientific method, and how does it work? In this guide, we’ll break down the scientific method step-by-step, explore its critical components, and discuss its importance in shaping our understanding of the world through empirical evidence.

Table of Contents

• What is the scientific method?
• The importance of the scientific method
• Steps in the scientific method
• 1. Observation
• 2. Question
• 3. Hypothesis
• 4. Experimentation and Data Collection
• 5. Analysis
• 6. Conclusion
• 7. Replication and Review
• The iterative nature of the scientific method
• Real-life example: The discovery of penicillin

What is the scientific method? 🔗

The scientific method is a structured, systematic approach used to investigate phenomena, test hypotheses, and gain empirical knowledge. It is a key tool in the arsenal of researchers across various fields, ensuring that findings are not just based on opinions or assumptions but are grounded in observable, repeatable evidence. Think of it as a blueprint for experimentation and problem-solving—one that allows researchers to ask questions, propose explanations, and test those explanations through experiments and observation.

The importance of the scientific method 🔗

At its core, the scientific method emphasizes objectivity, skepticism, and reproducibility. Its importance lies in its ability to provide a framework for developing reliable conclusions about the natural world. Unlike mere speculation or conjecture, the scientific method seeks to eliminate bias and ensure that results are valid, reliable, and most importantly, repeatable by other researchers. This process is essential not just in science, but in any research endeavor that aims to build knowledge based on facts.

Steps in the scientific method 🔗

The scientific method is often presented as a series of steps. While these steps can sometimes vary slightly depending on the field of study, the basic principles remain the same. Let’s explore these steps in detail:

1. Observation 🔗

Every scientific inquiry begins with an observation. This could be something you notice in nature, a question that arises from previous knowledge, or even a gap in existing research. Observation is the spark that ignites the research process, as it helps you identify an area of interest that needs further exploration. For example, a biologist might observe a decline in a particular species of birds in a specific region, prompting them to ask why this is happening.

2. Question 🔗

Once the observation is made, the next step is to ask a question about it. This is often framed as an inquiry into the cause, effect, or relationship between two phenomena. A well-defined question helps guide the focus of the study and gives the researcher a clear goal to work towards. For example, a zoologist might ask, “Why are the number of birds in this area decreasing?”

3. Hypothesis 🔗

Based on the question, the researcher forms a hypothesis. A hypothesis is a tentative explanation for the observation, one that can be tested through experimentation and data collection. It’s a statement that provides a possible answer to the research question but isn’t guaranteed to be true. For instance, the researcher might hypothesize that “The decline in bird populations is due to a loss of habitat caused by deforestation.” A good hypothesis is specific, testable, and falsifiable (i.e., it can be proven wrong through experimentation).

4. Experimentation and Data Collection 🔗

The next step is to test the hypothesis through experimentation. This involves designing controlled experiments to manipulate variables and collect data. Experiments should be designed to isolate the factor that is being tested while controlling for other variables. The goal is to gather data that either supports or refutes the hypothesis.

For example, the researcher could observe bird populations in different regions, some affected by deforestation and others that are not, and track their populations over time. The data collected can then be analyzed statistically to determine if there is a significant correlation between habitat loss and bird population decline.

5. Analysis 🔗

Once the data is collected, it must be analyzed. This step involves examining the data to determine if it supports or contradicts the hypothesis. Statistical tools and methods are often used to analyze the data, ensuring that the results are not due to random chance. In some cases, researchers may use software to run statistical tests that measure the strength and significance of the results.

If the analysis shows a clear pattern that supports the hypothesis, this strengthens the researcher’s argument. However, if the data does not align with the hypothesis, the researcher must consider why this is the case and what this means for their theory. Data analysis is a crucial part of the scientific method because it allows for objective conclusions based on evidence rather than assumptions.

6. Conclusion 🔗

After analyzing the data, the researcher draws a conclusion. This conclusion summarizes whether the data supports the hypothesis or not. If the hypothesis is supported, it can be considered a valid explanation for the observation. If not, the researcher may need to revise the hypothesis or develop a new one based on the findings.

For example, if the data confirms that deforestation is a significant factor in the decline of bird populations, the researcher would conclude that habitat loss is indeed a key factor contributing to the issue. However, if the data does not support the hypothesis, the researcher might have to reframe the question or investigate other possible causes, like climate change or pollution.

7. Replication and Review 🔗

One of the most important aspects of the scientific method is replication. This step involves repeating the experiment, often by other researchers, to confirm the findings. Replication ensures that the results are reliable and not just a fluke. In scientific research, findings are considered more robust when they can be reproduced by others using the same methods.

In addition to replication, peer review plays a critical role. Before results are published, they are usually reviewed by other experts in the field who evaluate the methodology, data analysis, and conclusions. This peer review process ensures that the research is credible and that any flaws or biases are addressed before the results become part of the scientific body of knowledge.

The iterative nature of the scientific method 🔗

It’s essential to recognize that the scientific method is not a one-time, linear process but rather an iterative cycle. Even after reaching a conclusion, new observations or advancements in technology may lead to new questions or hypotheses. Researchers often find that their conclusions lead to further experimentation, refinement of hypotheses, or deeper exploration of other related phenomena. This iterative nature is one of the reasons why science continues to evolve and grow.

Real-life example: The discovery of penicillin 🔗

To understand how the scientific method works in real life, let’s consider the discovery of penicillin by Alexander Fleming in 1928. The observation that led to this discovery was when Fleming noticed that a mold (Penicillium notatum) killed bacteria in a petri dish. This observation led him to form a hypothesis that the mold could be used as a medicine to treat bacterial infections. He then experimented by testing the mold on various bacterial cultures, analyzing the data, and eventually concluding that the mold had antibiotic properties. This process revolutionized medicine and saved millions of lives.

Conclusion 🔗

The scientific method is not just a process for scientists—it’s a model for all kinds of research and inquiry. It allows us to systematically explore questions, test our ideas, and build upon existing knowledge in a reliable and structured way. By following the steps of observation, questioning, hypothesizing, experimenting, analyzing, and concluding, we move closer to understanding the complexities of the world around us. The iterative nature of this method means that scientific progress is constantly evolving, paving the way for new discoveries, innovations, and breakthroughs.

What do you think? How has the scientific method shaped our modern understanding of the world? Can you think of any other discoveries that were made through this process?

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Research Methodology

1 Introduction to Research in General

• Research in General
• Research Circle
• Tools of Research
• Methods: Quantitative or Qualitative
• The Product: Research Report or Papers

2 Original Unity of Philosophy and Science

• Myth Philosophy and Science: Original Unity
• The Myth: A Spiritual Metaphor
• Myth Philosophy and Science
• The Greek Quest for Unity
• The Ionian School
• Towards a Grand Unification Theory or Theory of Everything
• Einstein’s Perennial Quest for Unity

3 Evolution of the Distinct Methods of Science

• Definition of Scientific Method
• The Evolution of Scientific Methods
• Theory-Dependence of Observation
• Scope of Science and Scientific Methods
• Prevalent Mistakes in Applying the Scientific Method

4 Relation of Scientific and Philosophical Methods

• Definitions of Scientific and Philosophical method
• Philosophical method
• Scientific method
• The relation
• The Importance of Philosophical and scientific methods

5 Dialectical Method

• Introduction and a Brief Survey of the Method
• Types of Dialectics
• Dialectics in Classical Philosophy
• Dialectics in Modern Philosophy
• Critique of Dialectical Method

6 Rational Method

• Understanding Rationalism
• Rational Method of Investigation
• Descartes’ Rational Method
• Leibniz’ Aim of Philosophy
• Spinoza’ Aim of Philosophy

7 Empirical Method

• Common Features of Philosophical Method
• Empirical Method
• Exposition of Empiricism
• Locke’s Empirical Method
• Berkeley’s Empirical Method
• David Hume’s Empirical Method

8 Critical Method

• Basic Features of Critical Theory
• On Instrumental Reason
• Conception of Society
• Human History as Dialectic of Enlightenment
• Substantive Reason
• Habermasian Critical Theory
• Habermas’ Theory of Society
• Habermas’ Critique of Scientism
• Theory of Communicative Action
• Discourse Ethics of Habermas

9 Phenomenological Method (Western and Indian)

• Phenomenology in Philosophy
• Phenomenology as a Method
• Phenomenological Analysis of Knowledge
• Phenomenological Reduction
• Husserl’s Triad: Ego Cogito Cogitata
• Intentionality
• Understanding ‘Consciousness’
• Phenomenological Method in Indian Tradition
• Phenomenological Method in Religion

10 Analytical Method (Western and Indian)

• Analysis in History of Philosophy
• Conceptual Analysis
• Analysis as a Method
• Analysis in Logical Atomism and Logical Positivism
• Analytic Method in Ethics
• Language Analysis
• Quine’s Analytical Method
• Analysis in Indian Traditions

11 Hermeneutical Method (Western and Indian)

• The Power (Sakti) to Convey Meaning
• Three Meanings
• Pre-understanding
• The Semantic Autonomy of the Text
• Towards a Fusion of Horizons
• The Hermeneutical Circle
• The True Scandal of the Text
• Literary Forms

12 Deconstructive Method

• The Seminal Idea of Deconstruction in Heidegger
• Deconstruction in Derrida
• Structuralism and Post-structuralism
• Sign Signifier and Signified
• Writing and Trace
• Deconstruction as a Strategic Reading
• The Logic of Supplement
• No Outside-text

13 Method of Bibliography

• Preparing to Write
• Writing a Paper
• The Main Divisions of a Paper
• Writing Bibliography in Turabian and APA
• Sample Bibliography

14 Method of Footnotes

• Citations and Notes
• General Hints for Footnotes
• Writing Footnotes
• Examples of Footnote or Endnote
• Example of a Research Article

15 Method of Notes Taking

• Methods of Note-taking
• Note Book Style
• Note taking in a Computer
• Types of Note-taking
• Notes from Field Research
• Errors to be Avoided

16 Method of Thesis Proposal and Presentation

• Preliminary Section
• Presenting the Problem of the Thesis
• Design of the Study
• Main Body of the Thesis
• Conclusion Summary and Recommendations
• Reference Material

Share on Mastodon